510 products

Solar repeller drive dog description: 

Technical data:

☆ Power: solar panels and 3 x AA batteries 

☆ Effective distance: up to 8M (depending on weather and environment)

 ☆ Detection angle: 110° level (visual weather around)

 ☆ Waterproof rating: IPX4. 

Animal species hearing range (Hz)

Cat 45-64K

Dog 67-45K

Flies 95-55K 

Horse 55-33.5K

Sheep 100-91K 

Bat 1K-200K

Dolphin 150-150K

Bullfrog 100-3K

Fish 20-3K
Field mouse 20-76K

House mouse 100-91K  

Technical data: 

 ☆ Power: 5.5V, 0.11W amorphous silicon solar panel 

 ☆Battery: 4×2/3AA 300mAh battery 

 ☆Battery material: Ni-MH charging once every 6~8 hours 

 ☆ Effective distance: 6-8M (depending on weather and environment) ☆ Detection angle: 110° level (visual weather around) 

 ☆ Waterproof rating: IPX4.

Features:    

1. It uses infrared detection principle, the infrared LED indicator lights up, the speaker works at 5 kHz for 2.5 seconds, then starts to output ultrasonic waves, while the white LED lights flash; when small animals are detected, ultrasonic waves are emitted to drive out small animals. It protects your property, your garden and your courtyard from harassment by nasty stray dogs, stray cats and other small animals.     

2. Because it is a portable design product, it can be installed anywhere in your home, garden, or courtyard. This product uses solar concentrators and rechargeable batteries, using renewable, clean energy – solar energy, which saves energy and protects the environment.

3. This product is only to drive animals without any harmful chemicals. It only emits 25kHz-61kHz frequency ultrasonic waves to drive them away. It will not harm the human body, harm animals, and protect animal species. .

 Description of each functional part of the product: 

 1) Speaker: This product can emit high frequency ultrasonic waves to drive away animals. 

 2) PIR motion detector: This is a pyroelectric infrared sensor. When a moving animal is in the detection range, it will detect it, and at the same time give the processor a signal to let the device start working, emitting sound waves to drive the animal and white. The LED indicator also flashes. 

 3) Red LED indicator: The red LED of the animal is illuminated to indicate the working status of the device. 

 4) White LED flash: Induction of the animal, the white LED flashing light starts to work, each time flashes 3 times, the flashing interval is 1.5 seconds, and the cycle continues until the animal leaves the protected area for 15 seconds, the device stops working and enters standby. . 

 5) Strong flash white LED is better for some animals such as birds, mice and cats. 

 6) Ultrasonic frequency conversion: The frequency bands of ultrasonic frequency conversion are: 25 kHz, 34 kHz, 43 kHz, 52 kHz, 61 kHz, each band operates for 2.5 seconds, and so on.